Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 1997/8 EEC-V ecu and other EMS bits
        
(Message started by: penny11 on Jul 21^st, 2005, 9:11pm)

Title: 1997/8 EEC-V ecu and other EMS bits
Post by penny11 on Jul 21^st, 2005, 9:11pm

I am looking for a EEC-V ecu and the other bits of the engine management system that are in the car, and 1997 or 1998 Scorp, that would have been fitted with the 24v BOB motor....
Why i can hear you saying......? :-)
..... I have a BOB motor that i am fitting into another Ford (not Scorpio), so I am looking for the parts I need to run the engine.....?
Any help or advice gratefully received...
Thanks
Penny

Title: Re: 1997/8 EEC-V ecu and other EMS bits
Post by howiedintheplace on Jul 23^rd, 2005, 11:58pm

Not as easy as you think, you will need the complete PATS, wiring loom + the management. Still no guarantee it would work thou. Firstly if your not using the auto gearbox you will never get the engine running correctly.
It will be quicker, easier & you will have better results with after market, get a Emerald ECU, they work well with 24v Cosworths. About £600 & you will get close to 230bhp with a decent map on a STD engine.

Title: Re: 1997/8 EEC-V ecu and other EMS bits
Post by penny11 on Jul 27^th, 2005, 12:23pm

Dave,

Thanks for the input, i am beginning to agree with you about the difficulty.... however the Emerald ECU sounds good, and 230BHP http://www.fordscorpio.co.uk/YaBBImages/grin.gif
Grin
how do i contact emerald?

thank again

penny

Title: Re: 1997/8 EEC-V ecu and other EMS bits
Post by Snoopy on Jul 27^th, 2005, 1:25pm

here are Emerald http://www.emeraldm3d.com/em_contact.html very good company used then several times

Title: Re: 1997/8 EEC-V ecu and other EMS bits
Post by howiedintheplace on Jul 29^th, 2005, 12:10pm

Another option is to use the old EEC as fitted to the MK3 BOA Cosworth & figure out a way of operating the variable inlet on the BOB.
Benefits are it's cheap & you can fiddle about with the EEC to remove the flat spots for auto gear changes & other stuff. It is possible on the EEC V also I am told but I have not tried so don't know for sure.
Take a look at this
http://www.moates.net/index.php?cPath=25_35