Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 24V-Crankshaft Pulley  & starter motor
        
(Message started by: barrie on Sep 7^th, 2005, 9:41pm)

Title: 24V-Crankshaft Pulley & starter motor
Post by barrie on Sep 7^th, 2005, 9:41pm

hi would you be able to help me with the following parts
Scorpio Cosworth 2.9V6 24V-Crankshaft Pulley (With vibration damper)
also a starter motor for a 24v

Title: Re: 24V-Crankshaft Pulley & starter motor
Post by howiedintheplace on Sep 7^th, 2005, 9:56pm

barrie
I think you just emailed me for them bits?
Anyway I have both, starter is almost new.

Title: Re: 24V-Crankshaft Pulley & starter motor
Post by barrie on Sep 7^th, 2005, 10:11pm

Thanks Dave for all your help I have emailed you back to confirm that I will have them. Thank you.

Title: Re: 24V-Crankshaft Pulley & starter motor
Post by barrie on Sep 12^th, 2005, 9:36pm

Thanks howiedintheplace
parts received and i have fitted the starter, works a treat and my scorp is up and running. Just cant get any petrol lol.

Title: Re: 24V-Crankshaft Pulley & starter motor
Post by howiedintheplace on Sep 13^th, 2005, 9:49am

Thanks Barrie

Good luck with that pulley. As I said I have the proper Ford tool which makes it a 5 minute job but you will have to use a genric pulley.
I am sure others have done it, ask for advice mate.

Cheers.