Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Self Levelling Rear Suspension bits
        
(Message started by: leftofcentre on Feb 14^th, 2006, 7:14pm)

Title: Self Levelling Rear Suspension bits
Post by leftofcentre on Feb 14^th, 2006, 7:14pm

Just wondering if anyone has any experience of these for the Saloon?

was an option wasnt it? I expect special shocks/springs are required?

How easy to retrofit?

Good when towing tho huh? Converts ones Ford into a Sh itroen }{

Title: Re: Self Levelling Rear Suspension bits
Post by Simmo on Feb 15^th, 2006, 7:45am

This thread discussed this and may help. http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=Problems;action=display;num=1136233237;start=9#9.

Title: Re: Self Levelling Rear Suspension bits
Post by Ultima_Stu on Feb 19^th, 2006, 8:04pm

I have a '95 saloon that has rear shocks with pnuematic pipework to them leading to a guage under the rear seat and a conventional tyre valve to recharge the system.

Never found another like it..........

Title: Re: Self Levelling Rear Suspension bits
Post by scorpio_man on Feb 19^th, 2006, 8:47pm

hi there

think that's the monroe system. normally used for towing.

http://www.monroe.com/products/mp_detail.asp?cat=0&detail=Max%20Air

Title: Re: Self Levelling Rear Suspension bits
Post by Ultima_Stu on Feb 19^th, 2006, 9:47pm

I'll butt out of this now - that I think has answered my unanswerable question. It is a Monroe pressure gauge.

Ta.