Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> inlet manifold for 2.9 12valve
        
(Message started by: tootalltechie on Mar 22^nd, 2006, 7:30pm)

Title: inlet manifold for 2.9 12valve
Post by tootalltechie on Mar 22^nd, 2006, 7:30pm

Hi :D
My name is Gordon H. I'm new here and I live in Canada. Over here we have the 2.9l v6 in the ford ranger 1983 to 1992. I have been told that the motors are identical except for the heads here are a light casting and crack under high heat. after maket heads can be put on here. But there is very few performace up grades here for the 2.9l. I have been told that the 2.9l inlet manifold and thottle housing would add 10 to 20 horse power to the engine. I was wondering how much it would cost to purchase the inlet manifold and all that would be needed to do the swap.
thanks for any info.
Gordon

Title: Re: inlet manifold for 2.9 12valve
Post by howiedintheplace on Mar 23^rd, 2006, 7:26am

Hi
I have supplied inlets before to the USA.

Send me a email howiedintheplace@hotmail.com

There is a guy in Edmonton, Alberta that has done it, I am sure he can advise you.