Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Clockspring wire, brake servo hose, trip buttons
        
(Message started by: adowds on May 11^th, 2006, 10:55pm)

Title: Clockspring wire, brake servo hose, trip buttons
Post by adowds on May 11^th, 2006, 10:55pm

Hey lads and lasses,

I need a replacement clockspring connector for a Cossie Ultima. It's got two multiplugs each end, for the airbag and cruise buttons. Also all the wee screws and fittings that hold it on.

Also need the hose that connects the brake servo to the inlet manifold on the 2.9 24v.

Finally, if you have a trip computer button module with all the green LEDs working, I'd like one of those... Mine works but two LEDS are dead.

LED's dead baby, LED's dead. (Pulp Fiction)

Title: Re: Clockspring wire, brake servo hose, trip butto
Post by Mummra on May 12^th, 2006, 12:37am

Hi I have a clockspring from a 2.9 12v estate available and a trip computer with all LEDs working. It is an easy job though to replace the LEDs.

http://www.fordscorpio.co.uk/tripswitch.htm

Dave

Title: Re: Clockspring wire, brake servo hose, trip butto
Post by adowds on May 19^th, 2006, 6:21pm

Right lads (& lasses)

Got the clockspring and tripswitches thanks to my man Mummra (all worked fine, thanks!)

Anyone got the servo hose?

Come on now, don't make me go to the Ford shop. Think of the Earth's natural resources we're saving here...