Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Cooling Fan wanted for 24V Cosworth
        
(Message started by: davem on May 12^th, 2006, 3:05pm)

Title: Cooling Fan wanted for 24V Cosworth
Post by davem on May 12^th, 2006, 3:05pm

I did manage to get one of these last year, from a member here, and it worked fine. Now the other fan has gone (b****r). Anyone got one? There are two fans (low profile fan motor on Cosworth) but both fans are identical. Anyone got one? Thanks

Dave

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by paulscorp on May 12^th, 2006, 4:16pm

Are the cooling fans different on a 24v? as opposed to a 2.3?

Got some here from a 2.3

regards

Paul

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by davem on May 12^th, 2006, 4:21pm

It is possible they are different. Last time when I enquired the Cossy uses fans that are "thinner" than other models, i.e low profile motors to stop them touching the flywheel.

Dave

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by davem on May 12^th, 2006, 4:34pm

Just double checked with the Ford Dealer. Yes, the Cossy is unique. I need a fan part number 6743806. Thanks Anyway

Dave

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by meg on May 12^th, 2006, 7:18pm

hi-fan is the same part no as the 12 valve colonge ones.hth

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by davem on May 12^th, 2006, 7:19pm

Oh ok...do you have one of those?

Dave

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by Mummra on May 12^th, 2006, 9:28pm

Hi I have a 2.9 12v estate which is currently being stripped, don't know if the fans are the same as the Cosworth, but they definately look different to my 2.3. I have both fans available though if they are any good to you.

Cheers

Dave

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by Mummra on May 13^th, 2006, 1:12pm

Have had a better look at the two cars again this morning and definately a big difference in the size of the fans. The ones on the 2.9 12v are alot more low profile than those on the 2.3 and seem to measure about 3 inches from the front of the housing to the back of the fan motor.

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by howiedintheplace on May 13^th, 2006, 5:10pm

I have some 24V fans if you still need them?

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by davem on May 17^th, 2006, 9:37am

Yes please....How much?

Title: Re: Cooling Fan wanted for 24V Cosworth
Post by Highlander on May 17^th, 2006, 11:39am

I have some too if you get stuck