Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Stereo remote stalk wiring
        
(Message started by: tintin on May 15^th, 2006, 1:06pm)

Title: Stereo remote stalk wiring
Post by tintin on May 15^th, 2006, 1:06pm

Looking for the wiring/connectors that run between a 2007 radio and the remote stalk by the steering wheel.

cheers

Title: Re: Stereo remote stalk wiring
Post by Mummra on May 15^th, 2006, 1:40pm

Hi here is a wiring diagram for the stereo system. I believe that the wiring doesn't run directly from the remote stalk to the radio, there is an remote interface module between them.

Title: Re: Stereo remote stalk wiring
Post by tintin on May 15^th, 2006, 2:01pm

yep, have a wiring diagram, mine has been snipped at the stereo end, not sure what else ! looks complicated enough to make me think it is easier when i take it all apart just to get the whole lot s/h then its just a plug and go repair, no "missing" connectors further up the line.

Title: Re: Stereo remote stalk wiring
Post by Mummra on May 15^th, 2006, 2:05pm

I have a car that I am currently stripping down and have removed all of the dash and just have all the wiring left so I will have a look this evening and see if I can trace out the cooerct loom if you like.

Dave

Title: Re: Stereo remote stalk wiring
Post by tintin on May 15^th, 2006, 2:40pm

aye, that would be cool, thanks

Title: Re: Stereo remote stalk wiring
Post by Mummra on May 15^th, 2006, 8:51pm

I have had a look at the wiring for the remote and with my multimeter have traced it out and drawn this crude basic wiring diagram for you, hope this is of some help to you.

http://i77.photobucket.com/albums/j48/Mummra1/Remote.jpg

Dave

Title: Re: Stereo remote stalk wiring
Post by tintin on May 15^th, 2006, 11:36pm

yep, Meg was kind enough to point me at this :-

http://www.carsoft.ru/avtorepair/sierra/cd.pdf

looking at pages 1 & 2, i think i need to loom from the radio interface module (4&13) through to the radio (including yellow connector? not sure what that is). im assuming the other connectors (14 and earth) are in place

Title: Re: Stereo remote stalk wiring
Post by tintin on May 18^th, 2006, 11:50am

im going to get some stereo removal tools and pull the dang thing out and document/trace the wires. will let you know exactly what flavours have been snipped..... i only had a quick look when the stereo was being recoded, he pointed out that 2 feeds had been snipped.

ps thanks for all the help

Title: Re: Stereo remote stalk wiring
Post by tintin on May 20^th, 2006, 4:34pm

Hi,

Update on this, the wires that have been snipped are the Grey/Orange and Blue/Black (with earth shielding) that runs from the radio to the interface. This is shown on P2 of the post that Meg showed me. If anyone can provide me with a replacement loom for this section, i would be very grateful.

cheers

Title: Re: Stereo remote stalk wiring
Post by Mummra on May 20^th, 2006, 6:53pm

Hi I have removed the stereo wiring from a 95 ultima estate and it is all intertwined, that is all the wiring from the stereo is joined with that from the amplifier and it all goes to 2 large connectors one grey and one white, which are behind the dash. I can send you a photo of this loom if you like.

If the wires have been snipped, my guess is the original wiring is probably still there and so it would probably be easier to find it and do a repair.

Dave

Title: Re: Stereo remote stalk wiring
Post by tintin on May 21^st, 2006, 3:57pm

yep pics always handy.... mine is snipped at the radio, so i have the wires, just no connectors, and given the earth shielding, doesnt look like a straight forward fix.

if you want to disentangle the bit im looking for from your loom, happy to chuck you some money for it. at the minimum i dont have the connector, so not sure how i would "repair" (especially given my ignorance of soldering etc), would need that bit.

cheers

Title: Re: Stereo remote stalk wiring
Post by Mummra on May 22^nd, 2006, 8:55pm

Hi here is a picture of the part of loom I have, The connector you are missing is the yellow one and as you can see all the wires go into the 2 large connectors on the left.

http://i77.photobucket.com/albums/j48/Mummra1/Loom.jpg

To remove just the part you require can only be done by cutting the wires, therefore some sort of repair work will be required.

Dave

Title: Re: Stereo remote stalk wiring
Post by tintin on May 23^rd, 2006, 6:42pm

hmmm, looks different to mine, i have an earth shielding wrapped around the wires, will take a pic when i get it back from the garage.