Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Engine Tray Fixings
        
(Message started by: DJWerkz on May 26^th, 2006, 9:49am)

Title: Engine Tray Fixings
Post by DJWerkz on May 26^th, 2006, 9:49am

I have managed to source an under engine tray but it did not come with any fixings. It looks like ther are four fixing points for this.

Does anyone have the correct bolts for this tray, or, know what size bolts/thread I need?

Title: Re: Engine Tray Fixings
Post by Simmo on May 26^th, 2006, 10:26am

They are torx screws on mine. They just screw into the plastic fittings so any suitable screw would do I guess.

Title: Re: Engine Tray Fixings
Post by DJWerkz on May 26^th, 2006, 10:30am

Are you saying that on the underside of the car there are plastic fittings that accept the screws to hold the tray to?

Title: Re: Engine Tray Fixings
Post by Simmo on May 26^th, 2006, 10:52am

Yes.

Title: Re: Engine Tray Fixings
Post by DJWerkz on May 26^th, 2006, 10:59am

Gotcha,...lets hope we get it fitted over the weekend OK,...pending a dry spell :-/

Title: Re: Engine Tray Fixings
Post by Baz on May 26^th, 2006, 12:04pm

They are red plastic on mine and there are two on each side of the tray. Just be careful fitting the tray where it goes around the horns. I have knocked the wire off the back on many occassion. Test that it is still working before dropping the car down

Baz

Title: Re: Engine Tray Fixings
Post by DJWerkz on May 27^th, 2006, 12:25am

Thanks for the tip Baz ;)