Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Door "Stay"
        
(Message started by: cossieguy on Aug 8^th, 2006, 7:12pm)

Title: Door "Stay"
Post by cossieguy on Aug 8^th, 2006, 7:12pm

Hi, as you might have read in "Problems" thread, my daughter busted my drivers door "Stay", (Kevlar type bar that stops the door from swinging around) anyone able to help me out?

Title: Re: Door "Stay"
Post by chaps987 on Aug 8^th, 2006, 8:49pm

I've got one of a 96 cosworth estate I imagine they are the same, just to be sure I assume it's the door stay fitted to the car body and into the door. passenger side or drivers side, front or back???

Title: Re: Door "Stay"
Post by Highlander on Aug 8^th, 2006, 11:56pm

"Drivers Door" ;D

Title: Re: Door "Stay"
Post by cossieguy on Aug 9^th, 2006, 7:21am

on 08/08/06 at 20:49:41, chaps987 wrote:

Hi Chaps, PM sent.

Title: Re: Door "Stay"
Post by chaps987 on Aug 11^th, 2006, 7:39pm

You have to remove the inside door panel to withdraw the stay from within the door. there's 3 screws on the edge of the door trim, 2 securing the door tray, screws are under the little plastic covers, a single large screw under the door handle.undo the door release trim screw but leave the handle in place, the panel is then secured by lugs which will pop off with a bit of careful pulling. and remove the speaker. you can then undo the stay 2 torx and 2 little nuts and withdraw it throught the opening where the speaker was. Good luck, door stay in post

Title: Re: Door "Stay"
Post by cossieguy on Aug 11^th, 2006, 7:55pm

Thanks CHAPS, will let you know when it has arrived.

Title: Re: Door "Stay"
Post by cossieguy on Aug 15^th, 2006, 10:44am

Big thankyou to chaps987, got my stay and fitted it,happy for now until the next thing comes along!