|
||
Title: PAS pump bracket Post by iain on Aug 24th, 2006, 4:48pm 2.5TDi VM engine. We've built the whole thing up and somehow lost this power assisted steering bracket. If anyones got one I'd love to find one. HELP!!!!!!! |
||
Title: Re: PAS pump bracket Post by mazzy_j on Aug 25th, 2006, 8:36am Most probably have one in my pile of spare bits. Got a picture (or a drawing) of what it looks like so i have some idea of what i'm looking for as it was a while since i took it apart? Matt |
||
Title: Re: PAS pump bracket Post by iain on Aug 25th, 2006, 2:06pm Thanks for replying. I haven't got a picture but the bracket has a semi circular "cut out" where the pump sits and a square hole at the top and should have some type of tensioner for the belt. Hope this is sufficient. Iain |
||
Title: Re: PAS pump bracket Post by iain on Aug 25th, 2006, 2:15pm The bracket is from the bottom left hand side of the engine as you look at the front |
||
Title: Re: PAS pump bracket Post by mazzy_j on Aug 25th, 2006, 2:20pm Righteo, i'm away at the moment but i'll let you know for definate monday morning once i've had a look in the garage. Matt |
||
Title: Re: PAS pump bracket Post by mazzy_j on Aug 31st, 2006, 8:29am I think i've found what you're after... does the little damper attach to its aswell? I'll get the part number off it later (or if you don't mind waiting til the weekend when i can take a digi pic of it?) just to make sure. Matt |
||
Title: Re: PAS pump bracket Post by iain on Sep 28th, 2006, 7:22am hi mazzy j did you have any luck with that pump bracket? It does have a hydraulic ram attached to it and i need it desperately. Many thanks for lookin and i'm sorry i took so long replying.. Iain |
||
Title: Re: PAS pump bracket Post by mazzy_j on Sep 29th, 2006, 3:13pm pm sent :) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |