Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 24V Penun and cams.
        
(Message started by: twinturbo on Sep 15^th, 2006, 7:30am)

Title: 24V Penun and cams.
Post by twinturbo on Sep 15^th, 2006, 7:30am

Lookign for a plenum and camshafts ( with washers ) from a BOB 24V.

Cheers

TT

Title: Re: 24V Penun and cams.
Post by hellblue on Sep 15^th, 2006, 10:55pm

youve got a boa then!!

Title: Re: 24V Penun and cams.
Post by twinturbo on Sep 16^th, 2006, 7:41am

2 of them,

For my Sierra...

Orignialy purchased in 1994, 1987 1.8GL RWD.

When I am finished... ( 6 years in progress and counting... )

2.9 24V , 4x4 , 17"'s , Cosworth kitted, Cosworth interior, Late spec Dash, Converted to ABS, LSD, etc etc etc... Konis, Snap off wheel,

It's been a while..

Initialy will be running a standard BOA, but the spare engine will be cleaned up, converted to BOB cams and plenum.

And then Ditch the EEC-IV for megasquirt or if funds allow and MBE setup.

Hopefully initialy ready for next year!

TT

Title: Re: 24V Penun and cams.
Post by howiedintheplace on Sep 16^th, 2006, 10:29pm

After a 24V intake and cams ;D

A'int we all :P

Title: Re: 24V Penun and cams.
Post by twinturbo on Sep 17^th, 2006, 6:11am

Had the cams earlier in the year, but we were in a cash flow situatio so I sold them...

Now there is no problem at all with cashflow but no cams :(

TT

Title: Re: 24V Penun and cams.
Post by hellblue on Sep 24^th, 2006, 8:38pm

I know of a 24v that MAY,be for breaking if the man can make his mind up, but it may be the price of the engine as he says the engines nfg without the cams (the cars nfg either way) the other problem is im in cornwall but i may be able to help there,if you could give me an idea of what you want to pay i will butter him up again !!

Title: Re: 24V Penun and cams.
Post by Matt on Sep 30^th, 2006, 9:43pm

if i cant get hold of some piston rings i've got a cossie engine in bits atm, which i'll then sell off in parts i'll keep you updated

matt :)

Title: Re: 24V Penun and cams.
Post by twinturbo on Sep 30^th, 2006, 9:47pm

okm8

Title: Re: 24V Penun and cams.
Post by chaps on Oct 2^nd, 2006, 4:49pm

twinturbo
Is this the L & R inlet manifolds that you are after, I might be looking at the wrong bits but if it is I've got them off a 96 2.9 24V cosworth, if interested, if not give me more directions and I may have it.
chaps

Title: Re: 24V Penun and cams.
Post by twinturbo on Oct 2^nd, 2006, 6:38pm

I have the branches now, just after the center section with the throttle boddy on it.

TT

Title: Re: 24V Penun and cams.
Post by chaps on Oct 2^nd, 2006, 7:19pm

twinturbo, sorry throttle body has already gone. chaps

Title: Re: 24V Penun and cams.
Post by twinturbo on Oct 2^nd, 2006, 7:21pm

Ok No problem..

I recon I am probably sorted anyway as I am just buying a whole 24v BOB and will put that in my project..

TT