Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> abs modulator
        
(Message started by: pedropedro on Oct 25^th, 2006, 9:16pm)

Title: abs modulator
Post by pedropedro on Oct 25^th, 2006, 9:16pm

Hi i need the abs modulator unit ...mine shows fault once a week ...not sensors ocde reads pumpmalfunction

part # is 96GG-2M110-AA x3 connectors in front x2 at back

would appreciate it if anyone has at a good price please... tks

Title: Re: abs modulator
Post by chrisq on Oct 26^th, 2006, 9:12am

hi i have one on 95 est number looks like 95GB2M110DA i have 2 othere cars here and all look same unit.

Title: Re: abs modulator
Post by pedropedro on Oct 26^th, 2006, 7:50pm

Hi Chris

dont know if this is the same unit ..there are x2 styles
all i know this is the part # on my unit

do you have a pic of the unit you have...john

Title: Re: abs modulator
Post by chrisq on Oct 26^th, 2006, 9:53pm

hi will take pic tomorrow cheers chris

Title: Re: abs modulator
Post by pedropedro on Oct 26^th, 2006, 10:36pm

just taken pic of my unit for reference ..see if it is same as this ?

cheers john

http://i14.tinypic.com/2aj6h79.jpg

Title: Re: abs modulator
Post by Highlander on Oct 26^th, 2006, 11:51pm

Now thats a pic!! ;D in Widescreen too :)

Title: Re: abs modulator
Post by chrisq on Oct 27^th, 2006, 7:57am

hi it not this one so if there are only two its the othere one cheers chris

Title: Re: abs modulator
Post by pedropedro on Oct 27^th, 2006, 8:34am

how do you change the attributes to get sensible size picture?

do you change the pixel ratio in a graphics program or what?

Title: Re: abs modulator
Post by Highlander on Oct 27^th, 2006, 10:29am

Yep, I usually shrink them to about 640 x 480

Title: Re: abs modulator
Post by pedropedro on Oct 27^th, 2006, 10:41am

Thanks for that highlander.....learning learning

i am 99% sure i just need the controller module...if it were solenoids sticking the fault would stay...it comes up once a weeek c1095 pump circuit failure clear code 5 days later back it comes ..drive car for 15 mins turn off ignition/ back on fault goes

wonder where i can source just the controller?? maybe just buy the whole thing and seperate..any ideas how difficult to replace just the controller ??