Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> gasket 
        
(Message started by: VSBlue on Dec 23^rd, 2006, 10:50am)

Title: gasket
Post by VSBlue on Dec 23^rd, 2006, 10:50am

i am looking for a gasket ford part number 6134390
the gasket gose front engine from block to water pump but not the water pump gasket the one behind the spacer if i can get a picture i will add to post

the car is scorpio 2.9 v6 12valve auto 1996 N reg

Title: Re: gasket
Post by Spannerdemon on Dec 25^th, 2006, 6:45am

Don't know if this will help you, but if it's a simple 'paper type' gasket, then most accessory shops sell Gasket paper in various thicknesses from which you can cut your own gaskets. You can get hole punches very cheaply from most discount tool shops too. I've got a set which cost about 2 quid, and they have been one of the most useful additions to my toolbox.

I regularly make my own gaskets using the above paper and hole punches.

There are also a number of 'instant gasket' type sealants which will form a joint between two surfaces.
Have a word with your accessory shop.

Of course you can always get the gasket from Ford. ;)