Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> tensioner for
        
(Message started by: taliban on Feb 21^st, 2007, 11:37pm)

Title: tensioner for
Post by taliban on Feb 21^st, 2007, 11:37pm

alternator belt, 2.5TD.....

Title: Re: tensioner for
Post by injector on Feb 27^th, 2007, 5:00pm

if you still need tensioner for your 2,5 td email me.

injector. ::)

Title: Re: tensioner for
Post by taliban on Feb 27^th, 2007, 9:48pm

got one cheers injector, but i think one of the newbies might be needing one, along with a belt.....

Title: Re: tensioner for
Post by injector on Mar 4^th, 2007, 2:46pm

who is it also there is a way of getting rid of the tensioner whitch i did on mine and works very well for the last 30.000 miles any way .

Title: Re: tensioner for
Post by taliban on Mar 6^th, 2007, 12:20am

chriscliff......so how do you get rid of the tensioner?

Title: Re: tensioner for
Post by the_boogeyman on Mar 6^th, 2007, 12:07pm

those pictures are nice but seem to take up so much space!!!

Title: Re: tensioner for
Post by Highlander on Mar 6^th, 2007, 2:12pm

on 03/06/07 at 12:07:29, the_boogeyman wrote:

those pictures are nice but seem to take up so much space!!!

Only if your screen resolution is set to 100x60 ;D

Actually Talibans posts if you look at them take up the same space as yours ;)

Title: Re: tensioner for
Post by the_boogeyman on Mar 6^th, 2007, 3:27pm

yes they have gone small now, before they were huge.

Title: Re: tensioner for
Post by injector on Mar 6^th, 2007, 4:38pm

its very simple and saves you a lot of money and gets rid of them silly tensioners .

Title: Re: tensioner for
Post by taliban on Mar 7^th, 2007, 1:46am

yeeeeeeeeees............go on.....................

Title: Re: tensioner for
Post by taliban on Mar 8^th, 2007, 2:05am

well, im waiting...........

Title: Re: tensioner for
Post by mazzy_j on Mar 14^th, 2007, 10:01am

i'm intrigued aswell.............. do tell :)

Title: Re: tensioner for
Post by the_boogeyman on Mar 14^th, 2007, 10:32am

looks like he aint telling ???

Title: Re: tensioner for
Post by petehull on Mar 14^th, 2007, 10:38am

Give us the lowdown on this Injector...Please :'( Pleeease.... :-[ Oh gooo on...

Title: Re: tensioner for
Post by chriscliff on Mar 14^th, 2007, 12:06pm

Taliban, thanks for the mention on 6/3. TD crankshaft front seals now obsolete I am told - I have posted an item on parts wanted.
Do you need thge special tools shown in the manual (seal remover and installer collar) to do the seal job. Also what about the aircon when the radiator is removed?

Title: Re: tensioner for
Post by taliban on Mar 14^th, 2007, 4:14pm

chris, if you have a look at your messages i replied on there a couple of days ago.
its a bit odd that the seals are obsolete considering the engine was used in other makes ???
steve savill has, or did have 2 diesel engines a week ago, i dont know what condition the seals are in, or if second hand ones are re usable, if they are then you would deffo need the special tool (or a fabricated one) to remove them so as not to damage the seal. his number is 07761 246096. just say phil passed you onto him.
as for putting the seal in, i would think a socket of the right size could be used to gently 'drift' it in. you will need a flywheel puller, i picked a new one up from ebay for about 8 quid including postage, and a 41mm socket for the pulley nut which is done up to 152lb with thread locking agent too.
if you're just removing the radiator (the one nearest the engine) then the air con isnt disturbed, draining the rad is simple, its just one hardened plastic type plug on the rear side bottom right as you face the car, a 1 or 2 pence piece held in pliers does it.

Title: Re: tensioner for
Post by taliban on Mar 14^th, 2007, 5:03pm

http://cgi.ebay.co.uk/NEW-FLYWHEEL-HARMONIC-BALANCE-PULLER-warranty_W0QQitemZ120096590455QQcategoryZ30917QQcmdZViewItem

flywheel puller.....

Title: Re: tensioner for
Post by chriscliff on Mar 15^th, 2007, 12:44pm

Thanks Taliban - I have just discovered where to find my messages!
I think I will try and find a new one using alternative makes with the same engine before I investigate s/h.

Title: Re: tensioner for
Post by taliban on Mar 15^th, 2007, 8:00pm

yeah, a new one would be adviseable, there must be a company that makes aftermarket seals etc that'll have them....

Title: Re: tensioner for
Post by injector on Mar 18^th, 2007, 2:54pm

hi boys sorry its been a long time getting back to you if you email me i will give you my number and you can ring me as it is easyer to tell you that way

injector ;D