Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 24v manifold
        
(Message started by: the_boogeyman on Apr 14^th, 2007, 2:33pm)

Title: 24v manifold
Post by the_boogeyman on Apr 14^th, 2007, 2:33pm

im in need of a drivers side manifold

Title: Re: 24v manifold
Post by Baz on Apr 14^th, 2007, 2:37pm

Inlet or exhaust?

Title: Re: 24v manifold
Post by the_boogeyman on Apr 14^th, 2007, 2:46pm

ahhh! sorry, exhaust ::)

it would appear that everytime i blow a cat my manifold cracks, so now i need to replace it and i have emptied the cat, so i get more power

Title: Re: 24v manifold
Post by ghia-x on Apr 14^th, 2007, 4:54pm

Straight through cat :o, I like that idear ;).
However I hope your ECU & oxy sensors are working well, as it may fail the MOT if not. :'(

I have a pr of a 12 valve manifolds but not sure if they fit. Been told the front pipes are the same, but I've never compaired them.

Ghia-x

Title: Re: 24v manifold
Post by the_boogeyman on Apr 14^th, 2007, 4:59pm

does anyone on here know whever they are the same

Title: Re: 24v manifold
Post by REDRDLC on Apr 15^th, 2007, 9:27am

Hi there,
There are two manifolds for sale on Ebay at the moment for a buy it now for £22.50 plus p&p each.I bought the cats from the guy and they are fine so i am sure they will be too.Also still have the sensors attached.I will try and find the item nos.
Paul.

Title: Re: 24v manifold
Post by REDRDLC on Apr 15^th, 2007, 9:32am

Hi again,
seller is squamp 1234,o/s manifold is item no 250098365947.
Paul.

Title: Re: 24v manifold
Post by ghia-x on Apr 17^th, 2007, 2:14pm

Hi mate. I've been checking the 12v-24v manifolds & I've found out that the 12v don't have a threaded hole to take the oxy sensor.
Soz mate no good for you. :'(.