Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> PASSENGER SIDE DRIVESHAFT AND HUB
        
(Message started by: cortinadale on Oct 30^th, 2007, 6:59pm)

Title: PASSENGER SIDE DRIVESHAFT AND HUB
Post by cortinadale on Oct 30^th, 2007, 6:59pm

ERRR my scorpio has decided it doesent need its pass driveshaft and hub!! anybody got one they wanna sell??

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by Matt on Oct 30^th, 2007, 7:02pm

hi mate

what car do you have and what size engine, there diffrent from saloon to estate and engine size

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by cortinadale on Oct 30^th, 2007, 7:04pm

thanks for the reply, its an N reg TD saloon mate, i was thinking about getting a mk3 granada driveshaft and a sierra hub. not sure if it would work tho???

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by Matt on Oct 30^th, 2007, 7:09pm

ive got a diesel that im going to break but i can get onto that for a few weeks,

i take it your despirate for it?

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by cortinadale on Oct 30^th, 2007, 7:27pm

yes mate, supposed to be my daily motor!!! anything else the same??

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by Matt on Oct 30^th, 2007, 8:01pm

the diesel is a torquey motor so id say the cossie ones are close if not the same, where abouts are you?

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by cortinadale on Oct 30^th, 2007, 8:10pm

im in northants. there is a guy in norwich breaking a cossie. whats the difference between driveshafts then??

Title: Re: PASSENGER SIDE DRIVESHAFT AND HUB
Post by Matt on Oct 30^th, 2007, 8:42pm

estates have a diffrent rear axel set up to the saloons

as for the saloons, i believe its just the torque rating