Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 12 valve bits
        
(Message started by: Tons_of_fun on Feb 16^th, 2008, 8:13pm)

Title: 12 valve bits
Post by Tons_of_fun on Feb 16^th, 2008, 8:13pm

Hi all,im after a idle control valve for a 12v ,as mine is getting a bit rusty ::).Also looking for the roof cross bars & other associated bits & bobs that go into the moulded recess in the boot of an estate (if you catch my drift).Thanks lads & lasses.....Craig :)

Title: Re: 12 valve bits
Post by gozz on Feb 16^th, 2008, 11:00pm

Tof.IACV cosmetics are easily overcome.Apply it to the wire wheel,then mask off the ally bit and spray with aerosol of choice.If it does,nt do it,s job,take it apart and wash out with carb cleaner

Title: Re: 12 valve bits
Post by Tons_of_fun on Feb 17^th, 2008, 1:01am

Thanks for that gozz.Polished it up last year & it looked fab,but am looking for another to polish up & fit for shows ;).Im in no rush though.Im quite curious to know what bits im missing from the boot though.I know roof bars & fixings were there,but not sure what else ? ? Anyway,everything that fitted in the moulded polystrene holder i need ::) ;D ;D

Title: Re: 12 valve bits
Post by Tons_of_fun on Feb 22^nd, 2008, 5:32pm

BUMP.....I,ve done a bit of research & it looks like the only things fitted in the moulded section of the under floor space was roof rails & fittings.Soooooooo...........If anyone has a set ,they are willing to sell please let me know .Thanks .....Craig :)

Title: Re: 12 valve bits
Post by shaun on Feb 22^nd, 2008, 6:19pm

hi m8 ive got the foam bits that the roof bars sit in and i thin i mite have some bars in the back of the shed ,will look in there tomz and let u no.... ;)

Title: Re: 12 valve bits
Post by Tons_of_fun on Feb 24^th, 2008, 5:29pm

Cheers buddy.I have the foam bit just nothing to put in it ;D ;D.No rush mate .Cheers.....Craig :)