Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Parts for 16v 2.3 needed
        
(Message started by: Scorpio_Mike on Feb 28^th, 2008, 5:30pm)

Title: Parts for 16v 2.3 needed
Post by Scorpio_Mike on Feb 28^th, 2008, 5:30pm

Took car to garage today as the exhaust manifold is chuffing a bit - bad news as it is a bit cracked - anyone got one going spare ?

Leaking fluid from power steering reservoir and pipes leading to the pump so need these also.

Please let me know if you can help

Thanks.

Title: Re: Parts for 16v 2.3 needed
Post by 5stud on Feb 29^th, 2008, 11:20am

we have compleat 2.3 ultima .where are you .as postel charges seam to kill theas articles

Title: Re: Parts for 16v 2.3 needed
Post by Scorpio_Mike on Feb 29^th, 2008, 9:58pm

on 02/29/08 at 11:20:10, 5stud wrote:

we have compleat 2.3 ultima .where are you .as postel charges seam to kill theas articles

Hi,
I'm near Tunbridge Wells in Kent.

Title: Re: Parts for 16v 2.3 needed
Post by gost on Mar 10^th, 2008, 2:56pm

Hi any chance u might have 2.3 inlet manifold?

Title: Re: Parts for 16v 2.3 needed
Post by pinto on Mar 15^th, 2008, 4:14pm

on 03/10/08 at 14:56:16, gost wrote:

Hi any chance u might have 2.3 inlet manifold?

Use the 2.0 one - its alloy so it dont crack, and has a bigger TB inlet area than the 2.3 one (double bores as opposed to a bigger single)