|
||
Title: Help! autobox oil cooler required Post by Bikerdon on Oct 20th, 2008, 12:44pm Hi, Does anyone have a spare good autobox oil cooler matrix, (the little one behind the front bumper) its for my 1997 2.0l 16V, I was replacing the steering rack at the weekend, pushed the pipe up to make room and 'crack' one of the pipe stubs has sheared off. "Que much colourful language >:(" Perhaps Mr Highlander and his amazing parts emporium may be able to help me! I'm happy to pay for a good one and postage, or make a donation to the website. thanks, Bikerdon. |
||
Title: Re: Help! autobox oil cooler required Post by Highlander on Oct 20th, 2008, 2:19pm Sorry not got one, as you've discovered they are very very delicate, I very rarely get one off in one piece. :-/ As a wee addition... I,ve seen a lot of Scorpios where the cooler has been bypassed or removed completely just by joining the hose ends together, doesnt seem to affect the gearbox, I know a new one is around £150 :o |
||
Title: Re: Help! autobox oil cooler required Post by Bikerdon on Oct 20th, 2008, 3:23pm Thanks Highlander. Yup they're delicate ok! the thought of bypassing it had crossed my mind but wasnt sure if it would cause problems, seems like its the way to go. I'm thinking a coil of copper microbore wound round the old one could be an option as well. |
||
Title: Re: Help! autobox oil cooler required Post by Scorpio_Mike on Oct 20th, 2008, 4:35pm Try a radiator repair specialist - they may be able to repair your old one ??? |
||
Title: Re: Help! autobox oil cooler required Post by ghia-x on Oct 24th, 2008, 11:01pm Hi all. Its been awhile. But I think I might just be able to help here. :) If I get a chance I'll ave a look over the wkend. ghia-x. |
||
Title: Re: Help! autobox oil cooler required Post by Bikerdon on Oct 24th, 2008, 11:15pm Hi ghia -x, that will be great if you can help, dont you just love this brilliant site. Bikerdon. |
||
Title: Re: Help! autobox oil cooler required Post by gozz on Oct 24th, 2008, 11:54pm Bikerdon. You could of course obtain an after market add on one from a gearbox or rad man,they strap on the front of the rad/condenser. GOZZ. |
||
Title: Re: Help! autobox oil cooler required Post by ghia-x on Oct 25th, 2008, 1:39pm Hi. Good news I've found one. That is if its 2ft long 3ins deep, 2ins wide & black. Oh no !! ::) that was ma reply to ann summers. }{ Yes matey. I have found an oil cooler no signs of leaks or no damp patches were theres been leaks either (when fitted), prob's do with a lick of paint. Can bubble rap & dispatch. Open to offers. Plus P+P. Ghia-x |
||
Title: Re: Help! autobox oil cooler required Post by Bikerdon on Oct 26th, 2008, 3:33am Thats great, will check the dimensions etc and hopefully let you know on sunday night, they sound about right though, both connection pipes are on the same end that I am sure of due to the fact of me breaking one off, no idea about price though, will leave that up to you to suggest one, I can pay you by paypal if that suits you better. Thanks again, Bikerdon. |
||
Title: Re: Help! autobox oil cooler required Post by Bikerdon on Oct 26th, 2008, 6:27pm Hi Ghia x, ok I've got some measurements, (approx) 19 inches in length, about 2.5 inches deep and roughly 1.5 to 1.75 inches wide, both pipe connections are on the same end and look about 8-10 mm in diameter. Not the easiest to measure while its still on the car. Bikerdon. |
||
Title: Re: Help! autobox oil cooler required Post by Snoopy on Oct 27th, 2008, 8:40am All the oil box coolers on the Scorpio range are identical .AFAIK . |
||
Title: Re: Help! autobox oil cooler required Post by Bikerdon on Oct 27th, 2008, 2:03pm Yes, that seems to be the case right enough Snoopy. Ghia x has come up trumps and is posting one out to me today :). Big Thank You to him, and to others for the suggestions and advice. Bikerdon. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |