|
||
Title: inlet manifold 2.3 Post by Kenboy on Mar 29th, 2009, 9:05am Hi anybody able to help out with this one. Kenboy |
||
Title: Re: inlet manifold 2.3 Post by Scorpio_Mike on Mar 29th, 2009, 9:28am Pretty hard to find part in good condition. Ebay Item number: 360115919730 is listed as being for a 2.0 Galaxy but it looks like the 2.3 Scorpio part. Maybe incorrectly listed ? Worth a look. Good luck. |
||
Title: Re: inlet manifold 2.3 Post by scorpio_man on Mar 29th, 2009, 4:23pm hi ken that indeed is the 2.3 GALAXY manifold. it's the same as the SCORPIO one, bar it needs 'furnished' with the brass ware off your old manifold. also the egr pipework is different. it's an easy enough swap over of the parts. most parts press in or glued in. hth |
||
Title: Re: inlet manifold 2.3 Post by Kenboy on Mar 29th, 2009, 6:17pm Hi thanks for your advice I hope I get lucky but I am curious as to what happened to the original brass threaded bush when I exchanged the sender units, I can only assume its still there and that when I tightened it up it just kept revolving inside the plastic manifold, hence the need for plastic metal. Checked around the area this morning after the thermostat had opened and it is bone dry but it is a worry On monday the car is going in for sill replacement and respray and then when I can afford it the wheel arches will have to be replaced, although there not to bad at the moment I know what you are thinking and that is I should have seen to the inlet manifold before now but I will be perfectly honest and say i ha ve only just recently smelt the coffee. Kenboy |
||
Title: Re: inlet manifold 2.3 Post by gost on Mar 29th, 2009, 6:49pm Re the wheel arches Kenboy, mine need doing, any idea what its likely to cost me? thanks Bruce |
||
Title: Re: inlet manifold 2.3 Post by Jonnycab on Mar 30th, 2009, 12:10am A bit of info ;).....Both the 2.3 & 2.0 Galaxy share the same plastic inlet manifold as the 2.3 Scorpio :) |
||
Title: Re: inlet manifold 2.3 Post by 5stud on Mar 30th, 2009, 10:26am on 03/30/09 at 00:10:31, Jonnycab wrote:
NO the 2.o galaxy usees the scorpio 2.0 8v with the spark plugs through the inlet manifold.not the 2.o16v scorpio moter |
||
Title: Re: inlet manifold 2.3 Post by 5stud on Mar 30th, 2009, 10:36am on 03/29/09 at 09:28:46, Scorpio_Mike wrote:
may be a libarary photograph?? |
||
Title: Re: inlet manifold 2.3 Post by Jonnycab on Mar 31st, 2009, 9:37am on 03/30/09 at 10:26:47, 5stud wrote:
This ebay listing HERE (http://cgi.ebay.co.uk/97-00-FORD-GALAXY-2-0-AUTO-PETROL-INLET-MANIFOLD_W0QQitemZ360115919730QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item360115919730&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318) must be wrong then :-/ |
||
Title: Re: inlet manifold 2.3 Post by Jonnycab on Apr 3rd, 2009, 3:16am 5stud, it would seem you are right about the manifold. I've checked 'Parkers' & they don't list a Galaxy 2.0 16V, only an 8V, so obviously the ebay listing isn't for a 2.0 Galaxy manifold ::) The manifold is obviously for a 2.3 16V Galaxy :)....seller is obviously confused as to which vehicle he took it from ;) Anyway, I'm gonna make him an offer & see if he accepts :) |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |