Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 12v Auto box
        
(Message started by: homer2themax on Jun 7^th, 2009, 12:27am)

Title: 12v Auto box
Post by homer2themax on Jun 7^th, 2009, 12:27am

Does anyone have an A4LDe (note the lower case e) auto box in good condition and not a thousand miles away from cambridgeshire that won't cost me the earth, moon, sky and my right arm?
Have seen one or two on ebay but they are always so d**n far away and if it's not collection only it's double the price to have it delivered.
I'm desperate to keep hold of this car but I know sooner or later I'm looking at a repair bill that will most likely result in another trip to the scrappy, and I don't want to do that.

Cheers,
Mark

Title: Re: 12v Auto box
Post by Highlander on Jun 7^th, 2009, 12:39am

have you had a look for Granada boxes?

http://cgi.ebay.co.uk/ford-granada-mk3-2-9-efi-auto-gearbox-from-L-reg_W0QQitemZ260422394742QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3ca2626376&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|240%3A1318|301%3A0|293%3A1|294%3A50

http://cgi.ebay.co.uk/FORD-GRANADA-AUTO-GEARBOX_W0QQitemZ120429291754QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1c0a2528ea&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|240%3A1318|301%3A0|293%3A1|294%3A50

http://cgi.ebay.co.uk/granada-scorpio-cosworth-24v-BOA-auto-gearbox_W0QQitemZ160333863191QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2554a49917&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|240%3A1318|301%3A0|293%3A1|294%3A50

Title: Re: 12v Auto box
Post by homer2themax on Jun 7^th, 2009, 12:47am

Yes but as per my other post re 12v boxes, I conclude that pre 02/95 boxes need a few wires cutting and splicing. If that's all that's needed then fine I'll give it a go.
BTW, your last link is for a 24v box (A4LDE) which I don't think will work in a 12v.

Thanks,
Mark