Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 24V catalyst heatshields
        
(Message started by: tlundkvi on Jun 16^th, 2009, 6:08am)

Title: 24V catalyst heatshields
Post by tlundkvi on Jun 16^th, 2009, 6:08am

I look for a set of somewhat decent heatshields for 24V. Living in Finland, needed to be taken into account when checking shipping cost. Offers are welcome! If an right hand side A-pillar trim panel (just the panel, I already have new mounting supplies) can be found at the same time, it would be great. The colour is white-greyish, but can post a picture if there is confusion or multiple options.

Prefer to pay using Paypal.

Title: Re: 24V catalyst heatshields
Post by cosworth24v on Jun 16^th, 2009, 8:32am

I have what u need post up picture of a pillar trim just to make sure

Eugene

Title: Re: 24V catalyst heatshields
Post by tlundkvi on Jun 16^th, 2009, 9:07am

http://dessign.info/apillar.jpg

It's greyish, with code 95GB03196AAW. I might be able to fix it (middle hook for stud is broken), so check the affect on the shipping cost of the parcel, this is quite big, but doesn't weigh anything.

pic seems to be temporarily offline, should show anytime soon.

Title: Re: 24V catalyst heatshields
Post by tlundkvi on Jun 16^th, 2009, 1:11pm

It looks like I will get the heat shields locally after all, so only the RHS a-pillar will be needed.