Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Torx bolts 4 driveshafts
        
(Message started by: Scorpio_Mike on Aug 8^th, 2009, 9:30pm)

Title: Torx bolts 4 driveshafts
Post by Scorpio_Mike on Aug 8^th, 2009, 9:30pm

Anyone got a spare set of Torx bolts for the driveshaft CV joints they don't want ?

Scorpio ones use a larger Torx bit than on the Sierra but are otherwise the same size & length.

Took the driveshafts off my Sierra XR4x4 recently and a few are damaged / rounded out - had some fun getting them out I can tell you :o

Ideally would like to use the Scorpio Torx bolts as the tool bit has better grip.

Thanks.

Title: Re: Torx bolts 4 driveshafts
Post by cosworth24v on Aug 9^th, 2009, 5:12pm

I have a set

Give me a call on 07815879956

Eugene

Title: Re: Torx bolts 4 driveshafts
Post by joe-satch on Aug 9^th, 2009, 5:19pm

i grind the bolt heads off,once the heads are off the rest of the bolt unscrews easy, and then i fit new bolts.i got them from a bolt suppliers :)

Title: Re: Torx bolts 4 driveshafts
Post by Highlander on Aug 9^th, 2009, 5:34pm

There are two different sizes Mike, the 16v's use a smaller/shorter ones, the diesel and V6's use they larger ones, (I think Eugenes is a 24v)

Title: Re: Torx bolts 4 driveshafts
Post by Scorpio_Mike on Aug 9^th, 2009, 6:13pm

Highlander is correct - I need the smaller ones.

Title: Re: Torx bolts 4 driveshafts
Post by cosworth24v on Aug 9^th, 2009, 10:01pm

Yea mine is a 24v