|
||
Title: Estate rear crossmember Post by pat on Apr 15th, 2010, 11:06am Hi Folks. Does anyone know if anyone supplies a replacement rear crossmember(estate) or is it a case of the welder fabricating one? Thanks, Pat. |
||
Title: Re: Estate rear crossmember Post by Highlander on Apr 15th, 2010, 11:30am Hi Pat :) Is it the actual chassis thats rusted? |
||
Title: Re: Estate rear crossmember Post by gozz on Apr 15th, 2010, 12:48pm pat. The estate rear crossmember LOOKS the same as the saloon,you do mean the bit with all the cutouts in behind the bumper do you ? if so I reckon it would be easier to replate your own.Estates do appear to suffer from rot in that area more than saloons for some reason. GOZZ. |
||
Title: Re: Estate rear crossmember Post by pat on Apr 15th, 2010, 3:21pm Hi guys. Thanks for replying. Can't see any cutouts in it from underneath. It's the rear chassis section which joins the n/s and o/s longitudinal chassis rails. It looks a simple enough section - for a welder or metal worker anyway. Anything's easy if somebody else is doing it! |
||
Title: Re: Estate rear crossmember Post by pat on Apr 16th, 2010, 7:05pm UPDATE. Thanks for the input guys but the welder has just been and it's not worth having it done. The cross member alone would be £150+even if the rest of the back end withstood the vibration. The underside is generally pretty ropey so along with other work it 's a non-starter as I can get £200 scrap. So - close to being Scorpless. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |