Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 2.3 Ultima Auto Engine Loom
        
(Message started by: gazobee on Jul 16^th, 2010, 9:07pm)

Title: 2.3 Ultima Auto Engine Loom
Post by gazobee on Jul 16^th, 2010, 9:07pm

Does anyone know where I can get one of these?
Ford have discontinued them and mine looks like a mixture of copper wire and dust. Car does not run any more and I would like to get it sorted if I can.

Thnx Ken

Title: Re: 2.3 Ultima Auto Engine Loom
Post by hlippo on Jul 16^th, 2010, 9:31pm

Fordpartsuk is your best bet
http://cgi.ebay.co.uk/Ford-Scorpio-Fuel-Shut-Off-Loom-/360163205035?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53db665fab

i bought one from them and it works like charm. other option is to rebuild the loom yourself

Title: Re: 2.3 Ultima Auto Engine Loom
Post by gazobee on Jul 16^th, 2010, 9:38pm

Thank you hlippo!

Legend!

Title: Re: 2.3 Ultima Auto Engine Loom
Post by gazobee on Jul 19^th, 2010, 8:02pm

Hello all, I have been trying to find a Fuel shut off loom for my 1997 Scorp. hlippo was kind enough to point me in the direction of Ford Parts UK but in spite of advertising the part as in stock they have none.
Now I know and you know that Ford discontinued them a while back but does anyone know where I can find one?

Title: Re: 2.3 Ultima Auto Engine Loom
Post by gozz on Jul 19^th, 2010, 10:30pm

If you can find a used one that's in fairly good shape,it's not a rocket scientist's job to take it apart and rebind it,several of us have had good results that way.
GOZZ.

Title: Re: 2.3 Ultima Auto Engine Loom
Post by gazobee on Jul 19^th, 2010, 10:48pm

I'm happy to do some refurbishment on a half decent loom. The problem I have is that I haven't been able to find one anywhere. Does anybody know of one for sale. I have had a sniff from ScorpioWorld on here so I'm going to check that out. Any others would be welcomed as a backup.

Thanks

Ken

Title: Re: 2.3 Ultima Auto Engine Loom
Post by Mike H on Jul 19^th, 2010, 11:20pm

FWIW I soldered in new wires on mine then sleeved overall with fibreglass based (I think) heatproof sleeving. Not that it was causing any problem 'cept after reading about it on here, twas pretty ghastly though albeit had been bound up in fabric insulation tape (someone had been concientious!)