|
||
Title: Anybody breaking a 12 valve ? Post by Stixy on Aug 24th, 2010, 10:45pm I am after the engine code resistor its located on the engine loom behind the dash thanks :) |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Aug 24th, 2010, 11:24pm From march 96 it is wired to pin 8 of this engine loom multiplug http://i139.photobucket.com/albums/q289/the_fomoco_kid/plugpin8.jpg |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Aug 27th, 2010, 9:52pm Anybody ? This resistor could be mounted on the multiplug bracket which is accessable through the top of the glovebox |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Sep 1st, 2010, 1:09pm Still looking :( |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Sep 12th, 2010, 9:55pm Still looking |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Sep 25th, 2010, 9:52pm Anybody ? |
||
Title: Re: Anybody breaking a 12 valve ? Post by lleewar on Oct 4th, 2010, 12:04pm I have a spare dashboard. Will look and see what has been left on it. Lee |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Oct 16th, 2010, 7:36pm I think it looks like this http://i139.photobucket.com/albums/q289/the_fomoco_kid/arr.jpg this is an air con diode with a diode ikon on the end i think the resister has a zig zag on the end |
||
Title: Re: Anybody breaking a 12 valve ? Post by lleewar on Oct 17th, 2010, 4:31pm Sorry Stixy, checked this morning, no luck. Lee |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Oct 17th, 2010, 6:01pm on 10/17/10 at 16:31:59, lleewar wrote:
Thanks for looking :) |
||
Title: Re: Anybody breaking a 12 valve ? Post by 3drzetec on Oct 24th, 2010, 8:05pm there was mention of a 2.9 with lpg near to me going cheap. would you be interested? |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Oct 27th, 2010, 7:54pm on 10/24/10 at 20:05:43, 3drzetec wrote:
Thanks Gaz but i have to do as it is at the moment ;) |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Nov 5th, 2010, 5:41pm Annyyyboddy ? |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Nov 13th, 2010, 10:58pm Still looking 12v's in scrapyards seem as rare as rockin horse teeth ;) |
||
Title: Re: Anybody breaking a 12 valve ? Post by Highlander on Nov 14th, 2010, 5:09pm i forgot all about this! will try and get a look at mine next weekend, I'm away most of the week |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Nov 27th, 2010, 9:14am on 11/14/10 at 17:09:35, Highlander wrote:
Any good ? |
||
Title: Re: Anybody breaking a 12 valve ? Post by ro284 on Nov 29th, 2010, 3:18pm Stixy, i have two ultimas to rob bits off later this week, one is a 12v one a 24v, i will have a look for one on the 12v which i used to own, and let you know asap, Bob |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Nov 29th, 2010, 8:46pm on 11/29/10 at 15:18:29, ro284 wrote:
Thanks ;D |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Jan 23rd, 2011, 11:48am Still looking :( |
||
Title: Re: Anybody breaking a 12 valve ? Post by ro284 on Feb 28th, 2011, 2:35pm Stixi sorry for delay, i have found one, on the number side, after ford logo, it reads 91 AG 10374 BA 89 7182 It has two wires to it , both Grey with orange marker, one of these has been cut, the other goes to a square blue plug, on the other side it has 4 H C. is this any good for you, If any use PM me an address and i'll send it, no cost. let me know, Bob |
||
Title: Re: Anybody breaking a 12 valve ? Post by ro284 on Mar 7th, 2011, 11:54am Stixy have you stopped looking? |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Mar 7th, 2011, 11:15pm on 03/07/11 at 11:54:24, ro284 wrote:
Sorry ive had password problems i have sent you a pm |
||
Title: Re: Anybody breaking a 12 valve ? Post by Stixy on Mar 10th, 2011, 9:13pm All sorted now thanks ;D |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |