|
||
Title: Pumice Front Windscreen vent Post by mondeoman on Oct 24th, 2010, 6:56am Hi, When I bought my car last year it had a small crack on the front windscreen vent, well over time that's got worse until it is completely broken, so I'm looking for a new one without any damage in Pumice colour. Not quite sure how easy it will be to remove the PATS light which is in the centre of the vent. Anybody done this and is it easy? Cheer, Simon |
||
Title: Re: Pumice Front Windscreen vent Post by scorpio_man on Oct 24th, 2010, 7:01am hi there the 'light' is just a cap that will pop off. the hardest bit will be getting the part in the correct colour! ;) hth |
||
Title: Re: Pumice Front Windscreen vent Post by mondeoman on Oct 24th, 2010, 7:12am Yes I did think I might struggle a bit as most cars seem to be in Raven. I much prefer Pumice and this was the colour in my old Mk1 Mondeo Ghia X |
||
Title: Re: Pumice Front Windscreen vent Post by Jeff on Oct 28th, 2010, 9:13am Are you still in need? I've got a pumice interior 24v estate so if you can help with advice on removal I can retrieve my one. I'm assuming you mean the long narrow strip at the bottom of the windscreen. Thing is, I'm in Woking, where are you? What chance of this surviving the post? Could put it in a tube of plastic pipe I spose... Jeff |
||
Title: Re: Pumice Front Windscreen vent Post by Simmo on Oct 28th, 2010, 10:28am If you look at This page (http://www.fordscorpio.co.uk/manual/interior/trim/fasciatrimto95.pdf) and scroll down to item 6 it looks as if the part simply prises out ??. |
||
Title: Re: Pumice Front Windscreen vent Post by lleewar on Oct 28th, 2010, 10:55am Jeff, I have recently installed a pumice interior into my car. Seeing your post, I was wondering if you have the push-in screw covers available please. Lee |
||
Title: Re: Pumice Front Windscreen vent Post by Tompion on Oct 28th, 2010, 4:24pm on 10/28/10 at 10:28:48, Simmo wrote:
Yes it does, but if mine's anything to go by chances are the plastic lugs will break off. :( |
||
Title: Re: Pumice Front Windscreen vent Post by Jeff on Oct 28th, 2010, 7:32pm Looks like it's a pop out job, but yes, I'd bet me bottom dollar the rivets wil have hardened and will break. I'll try at the weekend and see how lucky I am. Lee, yes I'll harvest some covers for you. Any particular ones required? Send me your address and I'll post 'em. |
||
Title: Re: Pumice Front Windscreen vent Post by Simmo on Oct 28th, 2010, 8:30pm Just a thought. Would it be possible to GENTLY warm the rivets with say a hairdryer or even a hot rag before attempting to remove them?. As with most things plastic a liitle gentle warmth may ease the fitting. :) |
||
Title: Re: Pumice Front Windscreen vent Post by Stixy on Oct 28th, 2010, 10:07pm I just flick them out with a screwdriver i have never had one break or crack . |
||
Title: Re: Pumice Front Windscreen vent Post by lleewar on Oct 28th, 2010, 10:18pm Jeff, PM sent. Lee |
||
Title: Re: Pumice Front Windscreen vent Post by mondeoman on Oct 31st, 2010, 9:47am Sorry guys, Not been on for a few days, but yes I am still in need of a windscreen vent in pumice if someone on here has a spare for me? I expect these parts usual gets scrapped with car? From what I can see the part seems to clip into place. Cheers, Simon P.S I don't break mine, the previous owner removed a mobile phone system and they crack it when removing it. Over time with temperature the crack has got worse till looks really bad :( |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |