Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Alloy Wheel Centres
        
(Message started by: PJDavis on Mar 28^th, 2011, 6:34pm)

Title: Alloy Wheel Centres
Post by PJDavis on Mar 28^th, 2011, 6:34pm

I thought I had got a set, but it turns out that the holes the securing bolt uses to screw them to the wheel are goosed. So, if anyone out there has two, as long as they're whole, and the hole for the locking screw is intact I'm happy. Couldn't care less about the condition, because they are to be sand-blasted and powder-coated.

Peter

Title: Re: Alloy Wheel Centres
Post by Baz on Mar 28^th, 2011, 7:54pm

Peter,

I had a tatty set of chrome ones somewhere at my mums. Let me have a look tomorrow to see if they are still there.

I'm guessing they are for the 12 spokes?

Baz

Title: Re: Alloy Wheel Centres
Post by amigafan2003 on Mar 28^th, 2011, 9:11pm

I have 4 12 spoke alloy wheels in the back garden complete with centers. I was going to weigh them in for scrap but you're welcome to the covers for a small fee if Baz doesn't come up with the goods.

Title: Re: Alloy Wheel Centres
Post by PJDavis on Mar 29^th, 2011, 6:09am

Thanks to both. Chrome ones might be a problem for powder-coating. I'll take the four from Amigafan, if you give me a price, including post, pm me your home addy, I could send a cheque, or if you've got paypal I'll bung it that way.

Peter

Title: Re: Alloy Wheel Centres
Post by amigafan2003 on Mar 29^th, 2011, 9:20am

Cool - I do have paypal - I'll go into the garden when I get home to make sure everything is in order (i.e. the kids haven't used them as frisbees) before taking payment.

Assuming they're all accounted for, how does £20 inc p+p sound, payable to my paypal account (i'll pm you the address).

Title: Re: Alloy Wheel Centres
Post by Kenboy on Mar 29^th, 2011, 9:36am

Hi mine were the same and I ran an 8mm thread tap through them and purchased black domed screws to fit, looks a treat. (Allan Heads)

Kenboy

Title: Re: Alloy Wheel Centres
Post by PJDavis on Mar 29^th, 2011, 9:48am

PM sent to Amigafan :D

Title: Re: Alloy Wheel Centres
Post by wheelrim on Mar 29^th, 2011, 8:48pm

trev here. steel wheels from Norfolk!

I have about 3 wheel centres in a bag due to go to scrap with other alloy.
I've taken the plastic iinserts out.

If they are any good to you I'll post them to you and if they turn out OK just make a contribution to this web site.

Just resend me your address if you want them.

Title: Re: Alloy Wheel Centres
Post by PJDavis on Mar 29^th, 2011, 9:50pm

What a great response as usual! Trev, great to hear from you again. I'll wait to see if Amigafan gets back to me with his yay or nay. If he can provide, that's great I'll take them from him. If the 'kids' have used them as frisbees I'll take up your offer if I may.

Thanks to all

Peter

Title: Re: Alloy Wheel Centres
Post by PJDavis on Mar 30^th, 2011, 1:20pm

Amigafan, Many thanks for you info'. Much appreciated.

Trev, you have a PM.

Peter