|
||
Title: Scorpio Manual gearbox parts Post by Dave2302 on Apr 4th, 2011, 10:02am Hi, I'm in the process of converting a 4X4 gearbox to hydraulic clutch release bearing......... From a manual MT75 Scorpio gearbox I need the nose cone that screws over the input shaft bearing, and the little casting that bolts between the release bearing and the bellhousing with 3 bolts each end. Dosh waiting, Cheers Dave |
||
Title: Re: Scorpio Manual gearbox parts Post by Matt on Apr 9th, 2011, 4:34pm dave, ive got the sierra version for the manual clutch, had a look today and i reckon it could be machined to match the hydraulic one |
||
Title: Re: Scorpio Manual gearbox parts Post by Dave2302 on Apr 10th, 2011, 5:13am Thanks Matt, but I've got loads of the Sierra type, problem is up here getting anything machined is a nightmare ;) A fella has EMailed me and I've sent the dosh, just waitig for the bitz now :) Cheers Dave |
||
Title: Re: Scorpio Manual gearbox parts Post by howiedintheplace on Apr 14th, 2011, 11:43pm Dave I have a couple of complete slaves for the conversion if you want one. |
||
Title: Re: Scorpio Manual gearbox parts Post by Dave2302 on Apr 20th, 2011, 6:44pm Yes Plz Dave, have one but need one more, pm sent on FordPower ;) Cheers Dave |
||
Title: Re: Scorpio Manual gearbox parts Post by Scorpio_Mike on Apr 26th, 2011, 10:52am Dave, Are you after a 3.92 front diff from a 4x4 Sierra ? Might have one in the shed ;) Let me know and have have a look. |
||
Title: Re: Scorpio Manual gearbox parts Post by gozz on Apr 26th, 2011, 9:34pm on 04/26/11 at 10:52:14, Scorpio_Mike wrote:
As Captain Scott said,"I may be gone some time" :o GOZZ. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |