|
||
Title: Cruise control for manual Scorpio Post by Marc1978 on Apr 24th, 2011, 12:29pm Hi all, Well I finally gave into temptation and with a few encouraging words from Matt, decided to convert my 24v to manual. With that now done, one of the side affects is no more cruise control :-[ so I am in need of all the cruise control parts from a manual scorpio. Any suggestions on where to go / parts gratefully welcomed. Thanks. |
||
Title: Re: Cruise control for manual Scorpio Post by Matt on Apr 24th, 2011, 6:49pm Marc what brake/clutch pedal bracket/loom have you used? just for an experiment fit the old cruise switch and keep the button held in with some tape, should work again then You'll need the brackets and switch and loom from a Manual to do it proper |
||
Title: Re: Cruise control for manual Scorpio Post by Marc1978 on Apr 24th, 2011, 7:02pm The brake/clutch pedal bracket is from a 2.5 TD and as for the loom, I haven't touched anything wiring wise, just put the swtiches back in the respective holes. |
||
Title: Re: Cruise control for manual Scorpio Post by Matt on Apr 24th, 2011, 7:21pm ah ok well using the auto loom (think it fits??) just plug the brake and cruise back in, should work unless you have the switches backwards? |
||
Title: Re: Cruise control for manual Scorpio Post by Marc1978 on Apr 24th, 2011, 7:30pm Nope, all plugged in okay but not coming on unless the pin on the swtich is too far away from the pedal and doesn't engage it? |
||
Title: Re: Cruise control for manual Scorpio Post by Matt on Apr 24th, 2011, 7:35pm what switchs are being used mate? auto or manual ones? |
||
Title: Re: Cruise control for manual Scorpio Post by Marc1978 on Apr 24th, 2011, 7:39pm There is one green switch on the brake pedal and that came from my auto originally. |
||
Title: Re: Cruise control for manual Scorpio Post by Matt on Apr 24th, 2011, 7:44pm ah you need 3 switches and a loom from the manuals then the loom is easy to swap, it just plugs into the main loom on the tray where the air bag loom and ignition key looms are you'll need the brake light switch from the manual ( do you have brake lights currently??) the cruise swicth which i think was blue and grey and the clutch cut off switch which is red and back |
||
Title: Re: Cruise control for manual Scorpio Post by Marc1978 on Apr 24th, 2011, 7:46pm I have the brake swtich from the auto which is blue. That's plugged in and working fine and that's all I have. I thought I might have them mixed up but the plugs are different so they can only fit one plug. |
||
Title: Re: Cruise control for manual Scorpio Post by Matt on Apr 24th, 2011, 7:52pm did you not have a green one before, also on the brake? the clutch one could be left out for now, its just series'd in with the brake one |
||
Title: Re: Cruise control for manual Scorpio Post by Marc1978 on Apr 24th, 2011, 9:31pm Yep, I had both the green and blue switch on my original pedal bracket and they are the ones I used on the new pedla bracket. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |