Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Thermostat housing cover.
        
(Message started by: Andycan on Sep 20^th, 2011, 1:21pm)

Title: Thermostat housing cover.
Post by Andycan on Sep 20^th, 2011, 1:21pm

Hi I am looking for the plastic thermostat cover for a 1996 2 litre scorpio asap please.

Thanks Andy

Title: Re: Thermostat housing cover.
Post by Matt on Sep 20^th, 2011, 1:35pm

Hi andy, i think ive got one, will check tomorrow

Title: Re: Thermostat housing cover.
Post by Andycan on Sep 20^th, 2011, 4:12pm

Thanks Matt I damaged mine trying to get the last bolt out which was on the bottom. I wonder why the used plastic instead of metal?

Title: Re: Thermostat housing cover.
Post by Stixy on Sep 23^rd, 2011, 7:53am

Hi Andy i have a stat housing £7

Title: Re: Thermostat housing cover.
Post by Matt on Sep 23^rd, 2011, 11:47am

Hi Andy

Sorry the one i have must be off a zetec or something as the parts numbers are no where near and has a 4 bolt fixing

Title: Re: Thermostat housing cover.
Post by Andycan on Sep 23^rd, 2011, 6:56pm

Thanks Matt Stixy has some now so I will try and get over to him.

Title: Re: Thermostat housing cover.
Post by Mike H on Sep 24^th, 2011, 1:53pm

I know now why I'm confused, I kept thinking about the water pump area, which is completely different http://livinginthepast-audioweb.co.uk/images/misc/Iamstupid.gif

Title: Re: Thermostat housing cover.
Post by Andycan on Sep 24^th, 2011, 1:55pm

lol got the cover or whatever it is now and just fitted it and it seems ok but will test it later to go shopping.

Title: Re: Thermostat housing cover.
Post by Mike H on Sep 24^th, 2011, 3:07pm

Just to recap then, the whole black coloured part is plastic yes? Any gaskets underneath?

Title: Re: Thermostat housing cover.
Post by Andycan on Sep 24^th, 2011, 3:49pm

yes it is . No gaskets as the stat has a rubber seal around it that stops the water escaping through the joint.

Title: Re: Thermostat housing cover.
Post by Mike H on Sep 24^th, 2011, 4:30pm

Oh right ta ;D