|
||
Title: Radiator Post by Lazenby43 on Apr 15th, 2012, 2:14pm Does anyone have a useable one please? Thanks |
||
Title: Re: 24V Radiator Post by Simmo on Apr 15th, 2012, 2:16pm You may also want to know that rads from the other engines have been successfully used,with minor mods, on the 24v. ;) |
||
Title: Re: 24V Radiator Post by Lazenby43 on Apr 15th, 2012, 2:58pm Thanks, that's exactly what I'd like to know. What can be adapted? |
||
Title: Re: 24V Radiator Post by Tompion on Apr 15th, 2012, 4:13pm Take a look here: http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin;action=display;num=1286379380 |
||
Title: Re: 24V Radiator Post by Lazenby43 on Apr 15th, 2012, 4:34pm thanks both. Does anyone have one? |
||
Title: Re: Radiator Post by ren on Apr 17th, 2012, 10:33am I have one of each,but they have been in a shed for last 5/7 years,and if useable, i don't know. Ren |
||
Title: Re: Radiator Post by Lazenby43 on Apr 17th, 2012, 7:55pm on 04/17/12 at 10:33:09, ren wrote:
Ren, I've pm'd you I know I will annoy a few regulars on here asking dumb questions but I'd rather be sure.......the small pipe from the side of the cap on the expansion tank, it is just an overflow is it? It is not connected to anything other than the tank? |
||
Title: Re: Radiator Post by Simmo on Apr 18th, 2012, 7:15am No one needs to be bothered about asking a question. That's what this site exists for and most things are simple when you KNOW!. The answer to your question is ...yes. Good luck with the rad. ;) |
||
Title: Re: Radiator Post by ren on Apr 19th, 2012, 4:17pm replied to pm |
||
Title: Re: Radiator Post by Lazenby43 on Apr 24th, 2012, 6:52pm I now have a rad following great help from Marcello and Ren. I will fit the BMW stat as recommended but I wonder if I could avoid the modification if I was to use a flexi bottom hose? Thanks to all. |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |