Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> Abs module
        
(Message started by: Glyn on Dec 22^nd, 2012, 11:40pm)

Title: Abs module
Post by Glyn on Dec 22^nd, 2012, 11:40pm

Has anyone got an ABS module that works that they are willing to part with? It is the type without the traction control for a 96 ultima 2.9 12v. Thanks.

Title: Re: Abs module
Post by PJDavis on Dec 23^rd, 2012, 1:31am

Hi Glyn

Sorry. Very remiss of me, I haven't looked yet! Looked Five minutes ago, and you can see the pics below, maybe if you're not sure someone on the site will let you know what it's off. I was assured it was OK when I got it a wee while ago along with some other stuff. If it's OK it's yours for my postage cost and a wee donation to the site always assuming it'll do the trick.

Sorry but Photobucket are still playing -up and I can only do links.

http://i771.photobucket.com/albums/xx357/PJJDavis123/DSCF3410_zpsbae53095.jpg

http://i771.photobucket.com/albums/xx357/PJJDavis123/DSCF3409_zps84459d6e.jpg

http://i771.photobucket.com/albums/xx357/PJJDavis123/DSCF3411_zps56e5b948.jpg

Thanks to Tomp and Adam, I get my pictures back on without flowing freely about with links.

Peter :D

Title: Re: Abs module
Post by Tompion on Dec 23^rd, 2012, 3:34pm

Hi Peter, in response to your question elsewhere as to whether this is non-TC I think it probably is.
If you look at the pictures below you should be able to tell. The non TC controller has fewer coils for the ports & 1 of the securing screws is inboard.

on 12/12/12 at 18:22:40, Tompion wrote:

Here's a comparison of the underside of the MK1V with & without traction:

http://i.imgur.com/y4D82Nz.jpg
http://i.imgur.com/Xmwc0ZL.jpg

Title: Re: Abs module
Post by gozz on Dec 23^rd, 2012, 4:03pm

Yes that's the 12valve one lads,I have the remains of one here from when I ran some 12v funeral vehicles.If the label is still on yours PJ,you could compare it,mine is :- 95GB-2M1 10-AD ( Label on pump motor)

Title: Re: Abs module
Post by PJDavis on Dec 23^rd, 2012, 6:55pm

I'm cooking a large Hot Spicy Chilli at the moment, and it's raining a wee-bitty to say the least! I'll check in the morning, it's still on top of the mower! ;)

Title: Re: Abs module
Post by lesterlad aka Rodders on Dec 24^th, 2012, 12:06am

on 12/23/12 at 18:55:29, PJDavis wrote:

I'll check in the morning, it's still on top of the mower! ;)

Hmm, ABS on a mower eh, Is that to stop it sliding into the bedding plants ? ;D

Title: Re: Abs module
Post by gozz on Dec 24^th, 2012, 9:43am

Bear in mind he's in Outer Jockland,his lawn may slope at 45 degrees making mower ABS even more necessary 8)

Title: Re: Abs module
Post by PJDavis on Dec 24^th, 2012, 10:40am

on 12/23/12 at 16:03:19, gozz wrote:

If the label is still on yours PJ,you could compare it,mine is :- 95GB-2M1 10-AD ( Label on pump motor)

Just checked. Yep that's the number on mine. I await Instructions! :)

Title: Re: Abs module
Post by Tompion on Dec 24^th, 2012, 11:07am

Here's the controller code.

http://i.imgur.com/3ZE0Sqj.jpg

Title: Re: Abs module
Post by gozz on Dec 24^th, 2012, 8:50pm

Yes that's it Dave,the very same.

Title: Re: Abs module
Post by Glyn on Dec 25^th, 2012, 1:13am

First of all a Happy Christmas to you all.
Now thanks to you all for your input and help as always. I think it is the same but I note from the pictures that the motor on Dave's has a different number to the module in Tompion's picture, was the same motor used on both types?
I would have thought up there Peter would need traction control on his mower as well as ABS- particularly as it is raining so much!
PM sent Peter
Glyn

Title: Re: Abs module
Post by gozz on Dec 25^th, 2012, 12:57pm

The motor and module numbers are always different,hence Tompion's post relating to the module number.There is little doubt that the unit PJ has is the correct one,but if you test your pump operation with a 12 volt supply and it's OK you may only need the module anyway thus saving postage weight.
GOZZ.

Title: Re: Abs module
Post by Glyn on Dec 26^th, 2012, 7:06pm

Thanks Gozz-I have PM'd Peter to that effect
Glyn

Title: Re: Abs module
Post by cosworth24v on Jan 4^th, 2013, 1:12pm

i have a full abs unit from a 24v bob

part nos

pump 95GB-2C285-AD

module 95GB 2C013BB

Title: Re: Abs module
Post by Glyn on Jan 5^th, 2013, 12:33am

Thanks for that but it was one without TC that I was after for a 12v that I have aquired,and Peter has sent me a module to try but I will bear you in mind since I still have both 24v's
Glyn