Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> WANTED: Inlet Manifold
        
(Message started by: scrappydoo on Apr 30^th, 2013, 4:05pm)

Title: WANTED: Inlet Manifold
Post by scrappydoo on Apr 30^th, 2013, 4:05pm

Got a '98 2.3 with the dreaded manifold crack, not really wanting to repair as would rather replace. There's a 2.0 one local to me on ebay but not sure if it has all the extras required to enable conversion so was wondering what anyone on here had available. ;)

Title: Re: WANTED: Inlet Manifold
Post by leewar on Apr 30^th, 2013, 9:45pm

Hi, I have a complete 2.0 manifold if you need one. Cheers Lee

Title: Re: WANTED: Inlet Manifold
Post by PJDavis on May 1^st, 2013, 9:09am

If you swap your 2.3 manifold for the 2.0 one along with the throttle-body and manage to get all the ancilliaries fitted-on, please do a write-up with pictures if you can. I'm not sure this is covered in the 'How-To' section in any great depth.
Peter

Title: Re: WANTED: Inlet Manifold
Post by Matt on May 1^st, 2013, 3:54pm

nope its not. the how to sectipn didnt exist when i did it and i never thought at the time about its usefullness when i had to do it :-[