Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> 95-V6 RAD
        
(Message started by: ro284 on Dec 20^th, 2013, 10:34am)

Title: 95-V6 RAD
Post by ro284 on Dec 20^th, 2013, 10:34am

Anyone got one for sale Please, i have tried to repair many times, while Milliput is very good, it is difficult to get it where i want it and where it needs to be, Also i think the Rad on the car has at some time tried to shed its plastic ends! possibly when the engine blew!! The car drives lovely after rewiring and re-building. I think the Rad is more important than the new tyres it needs first, Thanks Bob

Title: Re: 95-V6 RAD
Post by Scorpio_Mike on Dec 20^th, 2013, 11:30am

I have a brand new 2.3 rad still in the box which I bought as a spare - don't know if this can be used with the 2.9 12v but a lot of owners have used this rad with the 2.9 24v.

Think I also have a used rad from a Sierra 2.9 in 'the Shed' - don't know if that would work ???

Title: Re: 95-V6 RAD
Post by ro284 on Dec 20^th, 2013, 12:40pm

Thanks Mike, i am not sure what will fit what and can't remember what my 24v looked like! or my 2-3! ideally would prefer the right one but may not have a choice! i will have a look at some pictures, see if one of them may fit, and get back to you, Bob

Title: Re: 95-V6 RAD
Post by Tompion on Dec 20^th, 2013, 3:36pm

As far as I know the 12v has the temp sender in the rad whereas the 24v & 16v don’t, so you'd have to locate the sensor elswhere.

Title: Re: 95-V6 RAD
Post by ro284 on Dec 23^rd, 2013, 8:35pm

hi guys sorry for not getting back, Had other problems with the car, one of the front brake pads flew out, leaving the metal plate in the caliper, >:( i only had one set of rear pads (with indicator leads), So waiting for some new pads to fit, then i can get back to where i started! ??? Happy Christmas, Bob

Title: Re: 95-V6 RAD
Post by gozz on Dec 23^rd, 2013, 10:38pm

Didn't you convert to Kenlowe Bob ,if so did you render the rad temp sender redundant ? If Mikes is an auto rad you may well score there.
Don't forget the aircon cooling though !!

Title: Re: 95-V6 RAD
Post by ro284 on Dec 24^th, 2013, 1:50pm

Hi Gozz, yes have converted to a Kenlowe controller for existing fans, So the Fan switch position not a problem, and could be wired to any position, i was thinking about rad fixing brackets mainly, i guess what ever Rad the size must be pretty much the same! and my only concern would be the hose positions/sizes, but that also not a major thing, Unfortunately brakes are next priority to get done, Ta Bob