Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> Parts Wanted >> ATE Unit 95GB2C285AD
        
(Message started by: Matt63 on Jul 1^st, 2014, 11:43am)

Title: ATE Unit 95GB2C285AD
Post by Matt63 on Jul 1^st, 2014, 11:43am

Hello my 1998 Facelift 24V Ultima failed its MOT because the ABS module is faulty. Everything else was OK. Don't really want to scrap it but my garage are having difficulty repairing the module. Does anyone have any experience of resolving such a problem? Thanks Matt

Title: Re: ATE Unit 95GB2C285AD
Post by a900one on Jul 1^st, 2014, 5:39pm

Have a look in, How to do things, there is a thread on the abs problems, page 4 I think.

Title: Re: ATE Unit 95GB2C285AD
Post by Glyn on Jul 1^st, 2014, 11:45pm

Have they tried soldering the motor pins?-common fault.
I think Tompion knows a lot about the ABS

Title: Re: ATE Unit 95GB2C285AD
Post by a900one on Jul 2^nd, 2014, 9:43am

Tompion, has put it all in How to do things, page four. ;D

Title: Re: ATE Unit 95GB2C285AD
Post by Matt on Jul 2^nd, 2014, 9:53am

Or click http://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl?board=admin;action=display;num=1268910490 :P

Title: Re: ATE Unit 95GB2C285AD
Post by Tompion on Jul 2^nd, 2014, 10:33am

What code/s did they get?
The solder repair is for
C1095 Hydraulic Pump Motor Circuit Failure

The pictures in the repair thread are for a different controller to yours but yours can be repaired just the same assuming you have that fault code.

Title: Re: ATE Unit 95GB2C285AD
Post by a900one on Jul 2^nd, 2014, 12:27pm

I could not get that to work, Mat >:( I tried to put a link. ???

Title: Re: ATE Unit 95GB2C285AD
Post by Matt on Jul 2^nd, 2014, 2:18pm

You need to put url tags on the link mate at the start then at the very end

Title: Re: ATE Unit 95GB2C285AD
Post by Matt63 on Jul 7^th, 2014, 4:13pm

Thanks guys for all the help, the garage have just called to say that they have fixed it, they must have been reading the forum! Thanks again. Matt.

Title: Re: ATE Unit 95GB2C285AD
Post by Scorpio_Mike on Jul 7^th, 2014, 4:57pm

Good to hear that Matt, pleased you managed to get it sorted and keep the Ol' Gal on the road ;)

Title: Re: ATE Unit 95GB2C285AD
Post by Glyn on Jul 7^th, 2014, 11:36pm

That's great. I would be interested if you find out what the problem was and how they solved it.