|
||
Title: black adaptor plate from a facelift grill Post by Torbayboy on Oct 19th, 2019, 2:48pm On the facelift grill the middle 4 nuts are actually bolts, there is an adaptor bar some 60cm (24" for a leave voter) that has 4 sets of 2 holes in it, this adapts the bonnet fixings by bridging the gap between the new type grille and the bonnet. Anyone have one around also the 4 bolts that hold it in positon on the grille itself (not the small bolts that secure through the holes in the bonnet). Thanks Roy |
||
Title: Re: black adaptor plate from a facelift grill Post by Tompion on Oct 20th, 2019, 10:40am Is it this: https://www.ebay.co.uk/itm/401745525067 98gg-8b013-ac 1033564 |
||
Title: Re: black adaptor plate from a facelift grill Post by Torbayboy on Oct 20th, 2019, 11:26am Hi that looks about right it bridges the gap on the late grille to enable it to be attached to the bonnet by 4 bolts (the captive bolts from the original do not fit as they have changed the mounting format) also required are 4 oversize bolts to hold it all together which I do not have these are unusual as they have big threads to go into the plastic "bosses" in the grille itself. Ford Scorpio retaining rail Text reads:- "We sell here this new holding rail. It comes from a camp dissolution and was not yet installed. Part Number: Ford 98GG-8B013-AC, 1033564 Ford Scorpio 1994-1998 Due to storage and transport, slight signs of storage such as scratches and dirt have developed." Thanks Roy |
||
Title: Re: black adaptor plate from a facelift grill Post by Tompion on Oct 20th, 2019, 3:22pm I think the bosses are supposed to be moulded in but as they don't grease bolts they rust in so the insert comes out when you undo the bolt. |
||
Title: Re: black adaptor plate from a facelift grill Post by Torbayboy on Oct 22nd, 2019, 1:52pm Sorted now found one thanks all for help Roy |
||
Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1! YaBB © 2000-2003. All Rights Reserved. |