Ford Scorpio Forum - Print Page


    
      
        Ford Scorpio Forum
        (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
      

        General >> News >> Steptoe
        
(Message started by: KEF on May 5^th, 2004, 8:08pm)

Title: Steptoe
Post by KEF on May 5^th, 2004, 8:08pm

Hi Jerry

Did you get you H.B.C sorted out M8

[i] Keith[/i]

Title: Re: Steptoe
Post by steptoe on May 7^th, 2004, 10:46pm

Hi KEF

Not yet still waiting for a donor car.

Sorry for the delay in replying but i have been working my backside off this week to catch up from the bank holiday

Jerry

Title: Re: Steptoe
Post by KEF on May 7^th, 2004, 10:50pm

Hi Jerry
I hate to think what you must do for a living M8 ? ;D
Keith

Title: Re: Steptoe
Post by steptoe on May 7^th, 2004, 10:51pm

I'm a heating engineer

and there aren't enough of me to go round :)

Title: Re: Steptoe
Post by KEF on May 7^th, 2004, 11:00pm

Hi Jerry
I just wanted to know because you know I was getting
57 come up on the C.C reset, so I got another HBC for a breakers and tried that, but still getting 57 come up on the reset !! Both are the new modified unit's. so still not sure what's wrong.
Keith

Title: Re: Steptoe
Post by steptoe on May 7^th, 2004, 11:53pm

Keith

Have you tried the hbc fault finding. This should tell you if your hbc is working, if it is then it's likely that the satc is faulty or from what some others told me at derby it may take several resets till it really resets ? go figure

jerrt

Title: Re: Steptoe
Post by admin on May 7^th, 2004, 11:59pm

Keith,

code 57 is a tricky one, it doesnt always refer to a faulty HBC and often a rest will surfice. If you have CC faulty operation then take action but if its simply the 57 or 07 fault that comes up with no bad symptoms then just ignore it. If you have a true fault then investigate the tests on my ac index pages at http://www.fordscorpio.co.uk/acindex.htm

Pete
CC/AC Author
List Founder
Site Co-Founder

Title: Re: Steptoe
Post by KEF on May 8^th, 2004, 6:51am

Hi B.B
Yes your right B.B, the blower seem's to work fine, what ever I set it at, it correspond's and doesn't seem to stop and start, It's just when I try to reset the C.C unit I get the 00 Display up and then click down to 50 on the display and has soon as I take my finger off the button it jump's to 57 before I can press and hold the recycle button in to obtain the 00 display again to tell me it's reset.
Keith :-/

Title: Re: Steptoe
Post by Kevin_Tulloch on May 8^th, 2004, 9:28am

Hi Keith

I think it'd be easier to find someone who hasn't had that code come up when resetting!!!All i can suggest is to keep trying to reset the C/C.I've had the same problems with getting the fault code AND with it jumping back to 57,before i can do the final reset.Just keep trying and it should work (eventually!).

Regards
Kev

Title: Re: Steptoe
Post by KEF on May 8^th, 2004, 7:16pm

Cheer's Kev
I will persevere with the reset.
Thank's for your help Kev. M8
Keith

Title: Re: Steptoe
Post by scorpio_man on May 8^th, 2004, 10:03pm

hi there

when doing the re-set, press down to get the code 50. then start the reset (1 or 2 buttons), the error code will come back up, but just carry on pressing the button(s) until the flashing 00 appears. let the button(s) go and wait untill -- appear. job done. :)

hth