Ford Scorpio Forum (https://www.fordscorpio.co.uk/cgi-bin/yabb/YaBB.pl)
General >> News >> Engine front rebuild
(Message started by: johneisen2001 on Jun 5th, 2022, 6:29am)

Title: Engine front rebuild
Post by johneisen2001 on Jun 5th, 2022, 6:29am
Hi, I have a 2.9 12v Ultima. Would anyone be interested in helping to rebuild the front end of my engine. My car was at a garage since February. I pulled the plug  as we are in June now. They left all the bolts in a box don't know where they go plus they snapped some bolts going into the waterpump. The garage previous to that said I needed another engine. When all along it was the fuel pump not putting out enough pressure. It's been a nightmare! Any help advice appreciated.

Title: Re: Engine front rebuild
Post by Snoopy on Jun 5th, 2022, 7:46am
You need to tell us what area of the country you live in so anyone near can possibly help you.
The whole of the workshop manual is online.
It goes through the whole rebuild process which is NOT a difficult job if you have time and patience. The water pump for you model is readily available as it is the same as the Granada 12v .
Have a look HERE (https://www.fordscorpio.co.uk/CologneV6manual.htm)
GOOD LUCK



Ford Scorpio Forum » Powered by YaBB 1 Gold - SP 1.3.1!
YaBB © 2000-2003. All Rights Reserved.